Casella Low Flow Adaptor (for Absorbent Tubes)

£135.00£610.00

Low Flow Adaptor for Sampling pumps.  Used for the collection of vapour/gaseous phase samples The sample is normally collected on to an absorbent material (eg Carbon/Tenax etc) in a glass tube.  The ends of the sorbent tube are broken off and inserted into a tube holder which is then connected to a personal sampling pump.…

SKU: 209126A
Category:

Description

Low Flow Adaptor for Sampling pumps.  Used for the collection of vapour/gaseous phase samples

The sample is normally collected on to an absorbent material (eg Carbon/Tenax etc) in a glass tube.  The ends of the sorbent tube are broken off and inserted into a tube holder which is then connected to a personal sampling pump.

Generally the flow is lower (typically 20-200ml/min) and so either a dedicated low flow pump may be used or a medium flow pump, e.g. a Casella Apex2 using this Low Flow Adaptor.

For the sampling of gases and vapours a lower flow rate is generally set (20-200ml/min).

Buy as individual or pack of 5

 

 

Additional information

Low Flow Adaptors

Single Adaptor, Pk 5 Adaptors